Storage Trolley FAQ

The footprint of a Q-plus trolley when stacked is 1.2m2

The width of a Q-build is 1m x 1m when stacked.

Stack heights for a Q-build trolley vary between 1.25m and 1.5m.

Yes, they will fit through a standard door frame, however, you should keep in mind the Q-build trolley width.

We do not recommend any decks to be stored on their edge as this will warp the decks. Always store them flat.

Decks should be stored metal-to-metal or wood-to-wood to avoid deck surface damage.

Using the RQ35 trolley, handrails can be accommodated by removing the swage plugs from the legs of the dolly and adding a deck to the bottom; additionally, use a key stage strap to secure the handrails.
For double handrails, we suggest using a P44T trolley.

There are multiple possibilities for storage configurations. Take a look at the images below to guide you.

Flat bed trolleys are designed to move bulky loads across a space, ideally double bridge/decks. They may also store wedge bridge/decks, wheelchair ramps or double handrails.

A flat bed trolley measures 1700mm in length with double bridge/decks.

The width of a flatbed trolley with RQ14s is 750mm, and 900mm with RQ14+.